Real-Time Detection and Filtering of Radio Frequency Interference On-board a Spaceborne Microwave Radiometer: The CubeRRT Mission

The Cubesat Radiometer Radio frequency interference Technology validation mission (CubeRRT) was developed to demonstrate real-time on-board detection and filtering of radio frequency interference (RFI) for wide bandwidth microwave radiometers. CubeRRT’s key technology is its radiometer digital backend (RDB) that is capable of measuring an instantaneous bandwidth of 1 GHz and of filtering the input signal into an estimated total power with and without RFI contributions. CubeRRT’s on-board RFI processing capability dramatically reduces the volume of data that must be downlinked to the ground and eliminates the need for ground-based RFI processing. RFI detection is performed by resolving the input bandwidth into 128 frequency sub-channels, with the kurtosis of each sub-channel and the variations in power across frequency used to detect non-thermal contributions. RFI filtering is performed by removing corrupted frequency sub-channels prior to the computation of the total channel power. The 1 GHz bandwidth input signals processed by the RDB are obtained from the payload’s antenna (ANT) and radiometer front end (RFE) subsystems that are capable of tuning across RF center frequencies from 6 to 40 GHz. The CubeRRT payload was installed into a 6U spacecraft bus provided by Blue Canyon Technologies that provides spacecraft power, communications, data management, and navigation functions. The design, development, integration and test, and on-orbit operations of CubeRRT are described in this paper. The spacecraft was delivered on March 22nd, 2018 for launch to the International Space Station (ISS) on May 21st, 2018. Since its deployment from the ISS on July 13th, 2018, the CubeRRT RDB has completed more than 5000 hours of operation successfully, validating its robustness as an RFI processor. Although CubeRRT’s RFE subsystem ceased operating on September 8th, 2018, causing the RDB input thereafter to consist only of internally generated noise, CubeRRT’s key RDB technology continues to operate without issue and has demonstrated its capabilities as a valuable subsystem for future radiometry missions

Timing of surgery following SARS-CoV-2 infection: an international prospective cohort study.

Peri-operative SARS-CoV-2 infection increases postoperative mortality. The aim of this study was to determine the optimal duration of planned delay before surgery in patients who have had SARS-CoV-2 infection. This international, multicentre, prospective cohort study included patients undergoing elective or emergency surgery during October 2020. Surgical patients with pre-operative SARS-CoV-2 infection were compared with those without previous SARS-CoV-2 infection. The primary outcome measure was 30-day postoperative mortality. Logistic regression models were used to calculate adjusted 30-day mortality rates stratified by time from diagnosis of SARS-CoV-2 infection to surgery. Among 140,231 patients (116 countries), 3127 patients (2.2%) had a pre-operative SARS-CoV-2 diagnosis. Adjusted 30-day mortality in patients without SARS-CoV-2 infection was 1.5% (95%CI 1.4-1.5). In patients with a pre-operative SARS-CoV-2 diagnosis, mortality was increased in patients having surgery within 0-2 weeks, 3-4 weeks and 5-6 weeks of the diagnosis (odds ratio (95%CI) 4.1 (3.3-4.8), 3.9 (2.6-5.1) and 3.6 (2.0-5.2), respectively). Surgery performed ≥ 7 weeks after SARS-CoV-2 diagnosis was associated with a similar mortality risk to baseline (odds ratio (95%CI) 1.5 (0.9-2.1)). After a ≥ 7 week delay in undertaking surgery following SARS-CoV-2 infection, patients with ongoing symptoms had a higher mortality than patients whose symptoms had resolved or who had been asymptomatic (6.0% (95%CI 3.2-8.7) vs. 2.4% (95%CI 1.4-3.4) vs. 1.3% (95%CI 0.6-2.0), respectively). Where possible, surgery should be delayed for at least 7 weeks following SARS-CoV-2 infection. Patients with ongoing symptoms ≥ 7 weeks from diagnosis may benefit from further delay

Desarrollo de una aplicación destinada a la clasificacion de informacion textual y su evaluación por simulacion

International audienc

Changes of photochemical efficiency and epidermal polyphenols content of Prosopis glandulosa and Prosopis juliflora leaves exposed to cadmium and copper

The effect of metals on the photosynthetic activities and epidermal polyphenol content of Prosopis glandulosa and Prosopis juliflora leaves was investigated by the tissue tolerance test. Foliar tissues of Prosopis glandulosa and Prosopis juliflora were incubated with Cd2+ (0.001 M) or Cu2+ (0.52 M) concentrations for 96 h. The results showed that significant reductions (p < 0.05) of photochemical efficiency in P. juliflora leaves were found after 96 h of exposure to 0.52 M Cu2+ compared with Cd-treatments and controls. In contrast, P. glandulosa leaves showed a progressive increase on photochemical efficiency at 72 h after Cu-treatment. The results also showed a significant decrease (p < 0.05) of epidermal polyphenols in P. juliflora leaves after 24 h of exposure to 0.52 M Cu2+ compared with Cd-treatments and control leaves. On the other hand, the values of leaf epidermal polyphenols observed in P. glandulosa exposed to copper and cadmium did not show any difference with respect to control. These findings are very important and suggest that these compounds could be considered as a protection mechanism of P. glandulosa when is treated with these heavy metals. Finally, the results of bioaccumulation showed that the copper concentration in P. glandulosa was higher than the values detected in P. juliflora Nevertheless, the cadmium concentration in foliar tissues of P. juliflora was significantly higher than P. glandulosa after 96 h of exposure to Cu2+ or Cd2+. Therefore, future studies are necessary to elucidate the effects of heavy metals on the biosynthesis of flavonoids and participation of these compounds in the reduction of metal toxicity in Prosopis species

Testing and Operation Planning of the Cubesat Radiometer Radio Frequency Interference Technology Validation (Cuberrt) System

The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U CubeSat system to demonstrate radio frequency interference (RFI) detection and filtering technologies for future microwave radiometer remote sensing missions. CubeRRT will perform observations of Earth brightness temperatures from 6–40 GHz using a 1 GHz bandwidth tuned channel and will demonstrate on-board real-time RFI processing. The system is currently under development, with an expected launch date in mid-2018 followed by a one year period of on-orbit operations. CubeRRT spacecraft and radiometer instrument testing as well as the mission concept of operations are described in this paper

Testing and Operation Planning of the Cubesat Radiometer Radio Frequency Interference Technology Validation (Cuberrt) System

The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U CubeSat system to demonstrate radio frequency interference (RFI) detection and filtering technologies for future microwave radiometer remote sensing missions. CubeRRT will perform observations of Earth brightness temperatures from 6–40 GHz using a 1 GHz bandwidth tuned channel and will demonstrate on-board real-time RFI processing. The system is currently under development, with an expected launch date in mid-2018 followed by a one year period of on-orbit operations. CubeRRT spacecraft and radiometer instrument testing as well as the mission concept of operations are described in this paper

CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) Validation Mission: Enabling Future Resource-Constrained Science Missions

In this paper we discuss the necessary technology required to enable the future of spectrum resource constrained missions. We discuss the CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) validation mission and the development of its digital backend, necessary for performing on-board RFI detection and filtering for wideband high frequency radiometry. The CubeRRT mission will validate the on-board RFI filtering technology solving technological challenges such as bandwidth, data downlink volume, and RFI types. We present a few initial results of the backend spectrometer leading to full-system integration and test

CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) Validation Mission: Enabling Future Resource-Constrained Science Missions

In this paper we discuss the necessary technology required to enable the future of spectrum resource constrained missions. We discuss the CubeSat Radiometer Radio Frequency Interference Technology (CubeRRT) validation mission and the development of its digital backend, necessary for performing on-board RFI detection and filtering for wideband high frequency radiometry. The CubeRRT mission will validate the on-board RFI filtering technology solving technological challenges such as bandwidth, data downlink volume, and RFI types. We present a few initial results of the backend spectrometer leading to full-system integration and test

Timing of surgery following SARS-CoV-2 infection: an international prospective cohort study

Peri-operative SARS-CoV-2 infection increases postoperative mortality. The aim of this study was to determine the optimal duration of planned delay before surgery in patients who have had SARS-CoV-2 infection. This international, multicentre, prospective cohort study included patients undergoing elective or emergency surgery during October 2020. Surgical patients with pre-operative SARS-CoV-2 infection were compared with those without previous SARS-CoV-2 infection. The primary outcome measure was 30-day postoperative mortality. Logistic regression models were used to calculate adjusted 30-day mortality rates stratified by time from diagnosis of SARS-CoV-2 infection to surgery. Among 140,231 patients (116 countries), 3127 patients (2.2%) had a pre-operative SARS-CoV-2 diagnosis. Adjusted 30-day mortality in patients without SARS-CoV-2 infection was 1.5% (95%CI 1.4-1.5). In patients with a pre-operative SARS-CoV-2 diagnosis, mortality was increased in patients having surgery within 0-2 weeks, 3-4 weeks and 5-6 weeks of the diagnosis (odds ratio (95%CI) 4.1% (3.3-4.8), 3.9% (2.6-5.1) and 3.6% (2.0-5.2), respectively). Surgery performed >= 7 weeks after SARS-CoV-2 diagnosis was associated with a similar mortality risk to baseline (odds ratio (95%CI) 1.5% (0.9-2.1%)). After a >= 7 week delay in undertaking surgery following SARS-CoV-2 infection, patients with ongoing symptoms had a higher mortality than patients whose symptoms had resolved or who had been asymptomatic (6.0% (95%CI 3.2-8.7) vs. 2.4% (95%CI 1.4-3.4) vs. 1.3% (95%CI 0.6-2.0%), respectively). Where possible, surgery should be delayed for at least 7 weeks following SARS-CoV-2 infection. Patients with ongoing symptoms >= 7 weeks from diagnosis may benefit from further delay